CHAPTER I
INTRODUCTION
Medical and dental implants
employing hydroxylapatite (HA) plasma-sprayed coatings on a structural
substrate are now widely used in reconstructive surgery. Both the crystallinity
of the coating and the crystalline phase composition depend upon the plasma
spray processing parameters and are believed to affect the biological response
to the ceramic coating.[1,2,3,4] To verify the phase composition achieved,
x-ray diffraction characterization of the coatings is recommended by the Food
and Drug Administration [5] and required in ASTM F1185-88, "Standard
Specification for Composition of Ceramic Hydroxylapatite for Surgical
Implants".[6]
During the plasma-spray process,
highly crystalline sintered HA powder is rapidly heated to a partially molten
state and deposited at high velocity on a
relatively cold metallic substrate, commonly the titanium alloy
Ti-6Al-4V. Variation in either the plasma-spray conditions, particularly the
thermal history, or in the composition of the starting HA powder can alter both
the phase composition and crystallinity of the coating. The α or β forms of tricalcium
phosphate (TCP), Ca3(PO4)2; and calcium oxide,
CaO, have been observed in plasma-sprayed coatings. [1,2,3,4,7]
X-ray diffraction methods have
long been applied to characterize HA and related ceramic materials. However,
the quantitative phase analysis methods described to date for plasma-sprayed HA
coatings have usually been developed to measure specific features of the
complex diffraction patterns, such as crystallinity or HA content, rather than
providing complete phase analysis. The effects of variation in the mass
absorption coefficients of the component phases are not addressed, or require
an array of known mixtures for calibration. The crystallinity of biological or
precipitated HA can be calculated from the XRD peak-to-background ratio of a mixture
consisting of a single crystalline phase mixed with an amorphous fraction
relative to that of a fully crystalline reference sample. [8,9] This
method is not, however, generally applicable to plasma-sprayed coatings because
of the potential presence of multiple phases.
The purpose of this paper is to
describe an x-ray diffraction quantitative phase analysis technique applicable
to HA plasma-sprayed coatings based uponthe Reference Intensity Ratio (RIR)
method commonly applied in mineralogy which provides complete phase analysis [10,11],
modified to employ an external rather than an internal standard.
No comments:
Post a Comment